D-Link DGS-F1210-18PS-E 16-Port Gigabit PoE+ Smart Switch Price in Kenya

D-Link DGS-F1210-18PS-E 16-Port Gigabit PoE+ Smart Switch Price in Kenya

The D-Link DGS-F1210-18PS-E is a managed Gigabit PoE+ switch designed to connect and power compatible IP cameras, wireless access points, IP phones and other network equipment. It suits offices, schools, shops, hotels and surveillance installations that need organized connectivity and power management.

The switch provides 16 Gigabit PoE ports and two Gigabit SFP uplinks—18 network interfaces in total. Its shared 150W PoE budget must accommodate the combined requirements of connected powered devices. dlinkmea.com

For installations in Kenya, it provides a practical distribution point where both Ethernet connectivity and compatible-device power are needed.

D-Link DGS-F1210-18PS-E Price in Kenya

Contact Network Switch Kenya for a quotation covering the switch and the accessories required for your project.

Confirm:

• The exact model and hardware revision.
• Connected-device quantities and maximum power requirements.
• Required SFP modules and fibre leads.
• Mounting accessories and power cord.
• Configuration and installation services.
• Delivery, applicable taxes and warranty terms.

Explore networking equipment at Network Switch Kenya when preparing your equipment list.

You can also browse D-Link equipment at Tawa to compare models. Check specifications individually rather than assuming similarly named switches share the same capabilities.

Key Features and Benefits

Power and Data Through One Cable

PoE simplifies installation by carrying power and network traffic through an Ethernet cable. This is useful for compatible cameras and access points positioned away from electrical sockets.

Check each device’s required PoE standard before connecting it. Equipment requiring passive PoE or higher-power PoE++ needs a separately verified power arrangement.

Gigabit Connections

Gigabit access ports provide capacity for capable devices and concurrent traffic. Actual performance depends on endpoint capabilities, cabling, configuration and the uplink path.

A camera installation should be designed around total stream bandwidth as well as power consumption.

Fibre Uplink Options

The two SFP interfaces support suitable Gigabit optical connections. These can connect the switch to another network location without occupying a powered-device port.

Select modules around the fibre type, distance, wavelength and remote equipment. These uplinks are not 10Gbps SFP+ interfaces.

Managed Network Controls

Management features help administrators organize traffic, inspect connections and investigate faults. A planned configuration is particularly useful where cameras, office devices and wireless infrastructure share the same installation.

Extended-Reach Options

The switch supports a long-reach mode on selected ports. Assess this against the device load, cable installation and required bandwidth before using it.

Watch the supplied product video on YouTube

Key Specification

SpecificationD-Link DGS-F1210-18PS-ESwitch typeLayer 2 managed Gigabit PoE+ switchCopper ports16 × 10/100/1000Mbps PoE RJ45Optical uplinks2 × Gigabit SFPPoE standardsIEEE 802.3af/atMaximum PoE+ outputUp to 30W per port, subject to shared budgetTotal PoE budget150WSwitching capacity36GbpsForwarding rateApproximately 26.8MppsMAC address table8K entriesPublished dimensions440 × 180 × 44mmPublished weightApproximately 2.3kgPower input100–240V AC, 50–60HzOperating temperature0°C to 40°COperating humidity10–90%, non-condensingLong-reach portsPorts 1–8ManagementWeb interface and other documented management methods

Specifications follow D-Link’s regional and series datasheets. Confirm the supplied hardware revision before finalizing installation details. dlinkmea.com

Understanding the 150W PoE Budget

The available power is shared across the powered ports. Sixteen ports do not mean that sixteen devices can each receive 30W simultaneously.

Illustrative loadCombined requirementPlanning result10 devices requiring 10W each100WLeaves some operating margin12 devices requiring 12W each144WLeaves very little margin16 devices requiring 10W each160WExceeds the budgetFive devices requiring 30W each150WUses the entire stated budget

These examples are calculations, not guarantees of compatibility.

Use maximum device requirements. Camera infrared illumination, startup demand and cable losses can affect the installation. Leave practical margin rather than designing around the exact budget limit.

Network Management Features

D-Link documents VLANs, traffic prioritization, spanning-tree protocols, aggregation, mirroring and PoE controls for this model. These can help separate traffic and maintain an installation.

The regional datasheet also describes physical mode switches for extension, isolation, QoS and PoE recovery. Follow the supplied revision’s instructions: the physical “VLAN” mode is described as isolating access ports, which should not be confused with a fully planned tagged-VLAN configuration. dlinkmea.com

Typical Applications

CCTV Networks

Connect compatible cameras and transport their streams to a separate recording system. Match the NVR’s channel and bandwidth capacity to the installation.

The switch supplies connectivity and compatible-device power; it does not record footage.

Offices and Retail Premises

Distribute connections to suitable phones, access points and wired equipment. An upstream router provides internet access and gateway services.

Schools and Hospitality Premises

Provide a centralized distribution point for multiple network devices. Plan segmentation and uplink capacity around simultaneous use.

Networks with a Separate Router

The supplied MikroTik Kenya catalogue link and MikroTik equipment search at Orbitlink Solutions offer places to explore complementary equipment.

Choose a router around the required services and workload. Router capacity and switch PoE capacity are separate considerations.

For a small network point without powered outputs, review the MikroTik RB260GS at Network Switch Kenya.

How to Set Up the D-Link DGS-F1210-18PS-E

1. Identify the Hardware Revision

Check the label and supplied manual. Record the model, revision and serial number.

Use firmware and instructions that match the unit.

2. Calculate Device Demand

Prepare a schedule of devices, their PoE standards, maximum power demand and expected traffic.

Keep the combined power requirement below 150W with suitable margin.

3. Install the Switch

Use a stable surface or the supported mounting arrangement. Confirm which brackets and fixings are supplied.

Keep the unit dry and provide ventilation and connector clearance.

4. Connect Power

Use the supplied power cord and follow the electrical rating on the unit.

If using a UPS, include connected PoE equipment in the load calculation.

5. Connect One Uplink

Connect the switch to the router or main network. A suitable copper access port can carry an uplink, but doing so reduces the ports available for other devices.

Alternatively, use a compatible SFP connection. Begin with one uplink to avoid accidental loops.

6. Access and Secure Management

Follow the supplied manual to identify the initial management address and credentials. Do not assume defaults from another D-Link series apply.

Set strong credentials and record the management address. Restrict administration to the intended network where supported.

7. Configure Networks and Ports

Plan access ports, tagged links and management access before applying VLAN changes.

Coordinate settings with the router and other switches. Preserve a working management connection throughout configuration.

8. Connect PoE Devices Gradually

Attach verified compatible devices one at a time. Check that each starts correctly and inspect power consumption.

Investigate cabling, compatibility and budget limits if a device repeatedly restarts.

9. Configure Extended Reach Only Where Needed

D-Link documents up to 250m on eight selected ports. Extended operation reduces available link speed; it should not be treated as a 250m Gigabit connection.

Confirm the supplied revision’s extended-mode rate and whether it meets the application’s traffic requirement. Actual results depend on cabling and device load. downloads.dlink.com.sg

10. Test Recovery and Redundancy Settings

Test PoE recovery behaviour before enabling it across the installation. Automatic restarting can interrupt recording or other services.

Configure parallel links only after implementing supported aggregation or loop prevention at both ends.

11. Verify Normal Operation

Run the intended applications simultaneously. Review power consumption, link errors and uplink traffic.

Save configuration backups where supported and document port assignments.

Advantages

• Centralizes power and network connections.
• Provides Gigabit access interfaces.
• Offers separate fibre uplinks.
• Includes controls for network organization.
• Supports selected extended-reach applications.
• Suits mixed camera and access-point installations.

Disadvantages and Limitations

• Shared power capacity can limit device count.
• No 10Gbps uplinks.
• Extended mode reduces link speed.
• Requires configuration for advanced functions.
• Needs separate routing and recording equipment.
• Optical modules and installation materials may cost extra.

Package Contents

Confirm the seller’s itemized package, including the switch, power cord, documentation and any mounting hardware.

Specify SFP modules, fibre leads, Ethernet cables and UPS equipment separately.

Frequently Asked Questions

Can it power sixteen cameras?

Possibly, if their combined maximum demand fits the budget and each camera is compatible.

Does it provide Wi-Fi?

No. Connect suitable wireless access points.

Can it power passive PoE radios?

Do not assume compatibility. Check the receiving device’s exact requirements.

Does it replace a router?

No. Gateway services require suitable routing equipment.

Can extended mode deliver Gigabit speed over 250m?

No. Confirm its reduced rate and assess whether that meets the intended application.

Order from Network Switch Kenya

Contact Network Switch Kenya for a quotation. Include your device count, power requirements and cable distances so the installation can be assessed.