Ubiquiti UniFi Switch Lite 8 PoE Price in Kenya

Ubiquiti UniFi Switch Lite 8 PoE Price in Kenya

The Ubiquiti UniFi Switch Lite 8 PoE, model USW-Lite-8-PoE, combines wired networking, device power and centralized management in a compact switch. It suits home offices, small businesses, retail counters and smaller surveillance or wireless installations.

It provides eight Gigabit Ethernet ports, four of which support PoE+, with a 52W shared power budget. This arrangement accommodates a mixture of compatible powered equipment and ordinary Ethernet devices without requiring a larger switch. Tech Specs

Request the current Ubiquiti UniFi Switch Lite 8 PoE price in Kenya from Network Switch Kenya, including any required cabling, backup power and installation services.

Product Overview

The UniFi Lite 8 PoE is a managed Layer 2 switch administered through the UniFi Network application. It is useful when you want to manage connections alongside other supported UniFi equipment rather than deploy an entirely unmanaged network.

Only four ports supply PoE power. The remaining four provide network connectivity without powering endpoints. The switch also uses an external power adapter; it is not powered through a PoE input.

Its fanless design supports quiet operation, making it convenient near desks and in smaller equipment areas. Tech Specs

Media link

Key Specification

SpecificationUbiquiti USW-Lite-8-PoESwitch categoryManaged Layer 2Ethernet connections8 × 10/100/1000Mbps RJ45Powered connections4 × PoE+Non-PoE connections4Maximum output per powered port30WShared PoE budget52WSwitching capacity16GbpsNon-blocking throughput8GbpsForwarding rateApproximately 12MppsSupported VLANs1,000MAC address table8,000 entriesPacket buffer0.5MBManagementUniFi NetworkPower supplyIncluded external 60W adapterSupported DC input50–57VMaximum consumption8W excluding PoE; 60W including PoEPlacementDesktop or wallDimensions99.6 × 163.7 × 31.7mmWeight295gOperating temperature−15°C to 40°CFiber interfacesNone

Specifications follow Ubiquiti’s current technical information. Tech Specs

Features and Benefits

Power and Data Through One Cable

PoE simplifies installations where a nearby mains socket would be inconvenient. Compatible access points, cameras and phones can receive power and network data through the same cable.

Before connecting equipment, check its required PoE standard and maximum consumption. Devices requiring passive PoE or higher-power delivery may need another power source.

The switch’s shared budget must support the combined powered-device load.

Gigabit Connections for Everyday Equipment

Gigabit connectivity suits computers, printers and appropriately specified access points. It is also useful for local file transfers and access to shared resources.

Actual throughput depends on the equipment, cables and upstream network. Installing the switch does not increase the speed provided by an internet subscription.

Centralized Network Administration

UniFi Network provides a common management environment for supported devices. This can simplify administration when the installation already uses UniFi access points, switches or gateways.

Plan where the application will run, who owns the site and how administrative access will be maintained. Remote administration requires the appropriate connectivity and access arrangements.

Quiet, Compact Placement

The small enclosure is practical for a desk, shelf or supported wall installation. Fanless operation avoids cooling-fan noise.

Keep the switch and adapter ventilated. Compact equipment can still become warm, particularly while powering several endpoints.

A Mix of Powered and Ordinary Connections

Not every device needs PoE. Computers, printers and recorders generally use their own power arrangements, so the mix of powered and non-powered connections can suit a smaller installation.

Use a non-PoE port for the upstream router where practical, preserving the powered ports for equipment that needs them.

Typical Applications

Home Offices

Connect a computer, printer and compatible wireless access point at a central location.

One cable can link the switch to the main router while local equipment connects nearby.

Small Business Networks

Bring workstations and selected powered endpoints together. Use an appropriate router or gateway for internet access and firewall policies.

Wireless Access Point Installations

Connect compatible access points without placing an individual power adapter beside each one.

The access points still need wireless network names, security settings and any required VLAN configuration.

Smaller Surveillance Systems

Connect compatible cameras to powered ports and a recorder to an ordinary connection.

Check camera power requirements, especially night-time operation. Recorder channel count, recording bandwidth and storage capacity are separate considerations.

IP Telephone Deployments

Power compatible desk phones and connect other office equipment alongside them. Phones must also be provisioned for the business’s telephone system.

Understanding the 52W PoE Budget

The per-port maximum and shared power allowance are different limits. Four powered connections do not mean that all four can supply their individual maximum simultaneously.

Hypothetical powered-device loadCombined demand before cable losses4 devices consuming 8W each32W2 devices consuming 15W each30W2 devices consuming 20W each40W4 devices consuming 15W each60W

The final example exceeds the stated budget. These calculations illustrate planning rather than guaranteed supported combinations.

Use each device’s maximum requirement, account for cable losses and leave headroom. A camera or access point may consume more power under particular operating conditions than during an initial test.

Planning Your Connections

One upstream connection normally leaves seven ports for directly connected equipment.

Example arrangementPorts usedPlanning considerationRouter, 2 access points and 3 computers6Check combined access-point powerRouter, 4 cameras and recorder6Check camera demand, including night operationRouter, 2 phones, 3 computers and printer7Confirm phone compatibilityRouter and 7 endpoints8No spare physical connections

Allow room for future equipment. If the installation already needs more than four powered endpoints, choose a switch with additional powered connections.

How to Set Up the UniFi Switch Lite 8 PoE

1. Confirm Device Compatibility

List the endpoints and their maximum power requirements.

Identify which devices need PoE and which use separate power. Prepare tested Cat5e or Cat6 cables and confirm that the combined load leaves sufficient power headroom.

2. Prepare UniFi Network

Use a supported UniFi Network deployment and select the correct site.

Keep ownership under the business’s authorized account. Grant installers suitable permissions and preserve a backup before changing an existing deployment.

3. Position the Switch

Place the switch on a stable surface or use its supported wall-mounting arrangement.

Keep the adapter accessible and ventilation clear. Avoid moisture, excessive heat and cable positions that place strain on the connectors.

4. Connect the Supplied Adapter

Use the correct adapter and connect it to a suitable mains supply.

Do not assume that an upstream PoE switch can power this unit. Its documented power input is through the DC connection.

If backup operation is required, size a UPS for the switch, powered devices and other essential equipment.

5. Connect the Upstream Network

Connect a non-PoE port to the router’s LAN or an appropriate upstream switch.

Start with one upstream connection. Avoid parallel cables unless a supported aggregation or redundancy arrangement has been deliberately configured.

6. Discover and Adopt the Switch

For straightforward initial adoption, place the switch and UniFi Network host on the same reachable management network, with suitable DHCP available.

Open UniFi Network, identify the switch in the device list and complete adoption. If the application is hosted across a routed network, follow Ubiquiti’s Layer 3 adoption procedure instead. Device Adoption – Ubiquiti Help Center

For a previously managed unit, arrange an authorized migration or release. Do not reset installed equipment without understanding the configuration and ownership consequences.

7. Establish Management Settings

Assign a recognizable name and document the management address.

If moving management to another VLAN, first confirm the addressing service, tagging and path to the UniFi Network host. Incorrect management settings can make the switch appear offline.

8. Review Firmware

Check the installed firmware and applicable release information.

Schedule updates when an interruption is acceptable, maintain stable power and allow provisioning to finish before disconnecting equipment.

9. Configure Networks and Ports

Apply port settings according to the intended design.

For a segmented installation, distinguish between:

• Endpoint connections carrying an untagged network.
• Uplinks carrying the required tagged networks.
• Access-point connections carrying management and wireless networks.
• Specialized phone or other endpoint requirements.

Match the configuration on the router and connected equipment. A VLAN alone does not provide DHCP, internet access or permitted communication between networks. UniFi’s switch settings control these port and traffic arrangements. Ubiquiti Help Center

10. Connect Powered Devices Gradually

Use the ports marked for PoE. Add equipment individually and verify power allocation before connecting the complete load.

Configure each endpoint separately. Switch adoption does not complete camera recording, phone provisioning or wireless configuration.

11. Test Under Expected Load

Check all required services simultaneously.

For cameras, test recording and night operation. For access points, test client connectivity and expected traffic. Investigate unexpected restarts as a possible power, cable or endpoint issue.

12. Back Up and Document

Retain a UniFi Network backup and record port assignments, network settings and connected-device requirements.

Label the cables and store administrative recovery details securely.

Troubleshooting Common Problems

ProblemChecks to makeSwitch does not startCheck mains power, adapter and DC connectionSwitch does not appear for adoptionCheck addressing and reachability to UniFi NetworkPowered device does not startCheck the port, compatibility, cable and available budgetDevice restarts intermittentlyCheck maximum power demand and cable conditionSwitch goes offline after a changeCheck management VLAN, tagging and addressingConnection operates at 100MbpsCheck endpoint capability and the complete cable pathInternet fails but local access worksCheck the upstream router, gateway and serviceNetwork becomes unstableCheck loops and recent port changes

Advantages

• Combines Gigabit networking and PoE+ power.
• Integrates with UniFi Network administration.
• Fits smaller desktop or wall installations.
• Operates without cooling-fan noise.
• Reduces separate adapters for compatible endpoints.
• Supports a mixture of powered and ordinary equipment.
• Allows centralized backup power through a suitable UPS.

Disadvantages and Limitations

• Only four ports supply PoE.
• The shared power allowance requires careful load planning.
• An upstream connection uses one of the eight ports.
• No SFP or faster uplink interfaces.
• Requires a supported UniFi Network deployment for management.
• Does not provide Wi-Fi or internet gateway services.
• The external adapter needs its own installation space.

Alternatives for Different Requirements

For a different interface or power arrangement, compare the UniFi Pro 8 PoE at Ubiquiti UniFi Kenya. For another UniFi option, review the UniFi Enterprise 8 PoE, checking endpoint speeds, uplinks and power capacity against your project.

If ordinary wired expansion is sufficient, assess the TP-Link 8-Port Gigabit Switch at Orbitlink Solutions or the D-Link DGS-108 at Tawa.

For surveillance requiring different powered-port capacity, compare the Dahua Fast Ethernet PoE Switch at Reisen SEO. Confirm its exact model, power budget and connection speeds.

For fiber-focused connectivity, explore the MikroTik CRS309-1G-8S+IN. For a different copper-and-uplink arrangement, review the MikroTik CRS310-8G+2S+IN. These serve different requirements from a compact PoE access switch.

Package and Accessories

Confirm that the quotation includes the correct power adapter, mains connection and supplied mounting accessories.

Specify Ethernet cables, UPS equipment, endpoints and installation services separately unless expressly included. Verify product condition and warranty coverage before ordering.

Frequently Asked Questions

Do all eight ports supply PoE?

No. Four supply PoE+, while four provide ordinary Ethernet connectivity.

Can it power four access points?

Only if their individual requirements are compatible and their combined maximum demand fits within the available budget, allowing for losses and headroom.

Can another PoE switch power the Lite 8 PoE?

It uses an external adapter and DC input, rather than PoE input.

Does it require a UniFi gateway?

Management requires UniFi Network. The wider network can use compatible routing equipment, with the necessary configuration.

Can it power devices from other brands?

Yes, where their PoE standards and power requirements are compatible.

Does it include Wi-Fi?

No. Connect a separate access point for wireless coverage.

Buy the Ubiquiti UniFi Switch Lite 8 PoE in Kenya

Contact Network Switch Kenya for a quotation on the USW-Lite-8-PoE. Share your powered-device count, maximum power requirements and management setup to confirm whether it suits the installation.