D-Link DGS-1008D 8-Port Gigabit Switch Price in Kenya

D-Link DGS-1008D 8-Port Gigabit Switch Price in Kenya

The D-Link DGS-1008D is a compact desktop switch for expanding wired connections in homes, small offices, retail premises and workspaces. It connects computers, printers, smart TVs, game consoles and other Ethernet equipment to an existing network without requiring advanced switch configuration.

Its eight Gigabit Ethernet ports make it useful when a router has too few LAN connections or when several devices need to connect through one cable running to another room. It is an unmanaged, non-PoE model, making it suitable for straightforward connectivity where devices have their own power sources.

Request the current D-Link DGS-1008D price in Kenya from Network Switch Kenya, including confirmation of the hardware revision, supplied accessories and warranty coverage.

Product Overview

The DGS-1008D provides additional Ethernet connection points on the local network. Connect one port to the router’s LAN, then connect other equipment to the remaining ports.

One upstream connection normally leaves seven ports available for endpoint devices. If you need to connect eight endpoints alongside a router, choose a switch with additional capacity.

D-Link has released multiple hardware versions of this model. Dimensions, weight, memory and power consumption vary between revisions, so the specification table identifies revision-dependent details rather than treating every DGS-1008D as identical.

Media link

Key Specification

SpecificationD-Link DGS-1008DSwitch categoryUnmanaged desktop Ethernet switchNetwork interfaces8 × 10/100/1000Mbps RJ45Switching capacity16Gbps, documented for revisions I and L1Forwarding methodStore-and-forwardPort speed selectionAutomatic negotiationCable handlingAuto MDI/MDIXFlow controlIEEE 802.3xTraffic prioritizationIEEE 802.1p QoSEnergy efficiencyGreen Ethernet and IEEE 802.3az EEEJumbo framesApproximately 9KB; revision-dependent specificationPower arrangementExternal adapter; referenced revisions specify 5V/1AOperating temperature0–40°COperating humidity10–90%, noncondensingRevision I dimensions144 × 84 × 34mmRevision L1 dimensions142 × 75 × 22.45mmRevision I MAC table8K entriesRevision L1 MAC table4K entriesPoE outputNot providedFiber interfacesNone

The physical and performance figures above follow D-Link’s revision-specific datasheets. Confirm the label on the supplied unit before choosing replacement accessories. dlink.com

Features and Benefits

Expand an Existing Wired Network

The switch is useful when the available LAN ports on a router are already occupied. It can also serve equipment in a room connected to the main router by a single Ethernet cable.

For example, a home office could connect a computer, printer and storage device locally while using one upstream connection to reach the wider network.

Gigabit Connectivity for Local Equipment

Gigabit connections can help with local file transfers, shared storage access and other applications involving suitably equipped devices.

Actual performance depends on the whole connection path. A slow storage drive, older network adapter, damaged cable or slower upstream port can limit the result.

Gigabit full-duplex operation allows simultaneous sending and receiving. It does not turn a single download into a 2Gbps transfer.

Straightforward Operation

Basic use does not require a switch management account, VLAN configuration or a controller.

Connected equipment still needs appropriate network settings. A printer must be configured on the computers using it, while a camera needs activation, secure credentials and recorder setup.

If you require configurable traffic separation or detailed port administration, choose a managed switch instead.

Energy-Saving Functions

D-Link documents power-saving behavior that responds to link conditions, together with Energy-Efficient Ethernet support. These functions operate automatically rather than requiring the user to manage power settings manually. www2.dlink.com

Energy-saving features do not mean that the switch supplies power to endpoints. The DGS-1008D does not provide PoE.

Automatic Traffic Prioritization

The documented priority handling can assist compatible, marked traffic when connections become busy. It does not provide the configurable policy controls associated with a managed switch. dlink.com

Good application performance still depends on sufficient network capacity and correctly configured upstream equipment.

How the D-Link DGS-1008D Is Used

Home Offices

Connect computers, a printer, network storage and other wired equipment in one workspace.

Wired networking can be useful for equipment positioned permanently at a desk, especially where wireless signal strength is inconsistent.

Small Business Workstations

Bring several computers and shared resources together at a central connection point. The router continues to provide internet gateway services, addressing and firewall protection as configured.

Plan for future equipment rather than filling every port immediately.

Home Entertainment

Connect a smart TV, game console, streaming device and other Ethernet-equipped equipment near the television.

The switch adds connection points; the quality of internet streaming still depends on the service, router and application.

Shared Storage

Connect suitable computers and a network storage device for local access. File-transfer speed depends on storage performance as well as the network.

Several users accessing the same resource may share that resource’s connection capacity.

Surveillance Connections

The switch can carry traffic between separately powered cameras and recording equipment.

For cameras requiring Ethernet-delivered power, assess a suitable PoE alternative such as the Dahua 8-Port Fast Ethernet PoE Switch at Reisen SEO. Confirm its exact model, power budget and connection speeds before purchase.

Planning Port Capacity and Performance

A realistic connection plan helps determine whether an eight-port switch is large enough.

Example setupPorts usedPorts remainingRouter, four computers and printer62Router, computer, TV, console and storage device53Upstream switch and seven endpoints80

The upstream connection carries the combined traffic that needs to leave the switch. Local traffic between directly connected devices follows a different path from traffic crossing the router connection.

For another compact option, compare the TP-Link TL-SG1008D Gigabit Desktop Switch. If more connections are required, consider the TP-Link TL-SG1016D 16-Port Gigabit Switch.

How to Set Up the D-Link DGS-1008D

1. Confirm the Supplied Hardware

Check the model and hardware revision on the label. Ensure that the correct adapter is available and inspect the equipment for damage.

Use the installation instructions supplied for that revision.

2. Plan Device Connections

Count the endpoints and reserve one port for the upstream network.

Identify cameras, phones or access points needing a separate power supply. Do not expect the switch to power them through Ethernet.

Prepare tested Cat5e or Cat6 cables. For ordinary copper Ethernet, plan within the standard 100-meter channel limit.

3. Position the Switch

Place it on a stable surface in a dry, ventilated location. Keep connectors accessible and avoid covering ventilation openings.

Use wall mounting only where the supplied unit and installation instructions support it.

4. Connect the Power Adapter

Use the adapter specified for the unit. A replacement must match voltage, polarity, current requirements and connector dimensions.

Do not choose an adapter solely because its plug fits. Check that the power indicator illuminates after connection.

5. Connect the Router or Upstream Switch

Connect a router LAN port to any Ethernet port on the DGS-1008D.

For an ordinary home or office installation, retain the existing modem/ONT-to-router arrangement and connect the switch on the router’s LAN side.

Begin with a single upstream connection. Avoid connecting parallel cables between switches, as this can create a network loop.

6. Connect Endpoint Equipment

Connect computers, printers and other devices to the remaining ports.

Check their link indicators. If a connection is absent, verify that the endpoint is powered on and both cable ends are securely seated.

7. Check Network Addressing

Where the router supplies DHCP, set ordinary client devices to obtain their network settings automatically.

For static-address equipment, confirm a unique IP address, appropriate subnet and correct gateway and DNS settings.

The switch itself does not require a management address for normal operation.

8. Test Local Resources and Internet Access

Open a website from a connected computer. Then test any local resources separately.

Print a test page, transfer a representative file or check camera recording and playback as applicable. Testing only internet access may miss local configuration problems.

9. Investigate Unexpectedly Slow Connections

Inspect the network adapter’s negotiated speed on a connected computer.

If it reports 100Mbps instead of Gigabit, check:

• Whether the endpoint supports Gigabit Ethernet.
• Cable condition and termination of all four wire pairs.
• Any patch panels or wall outlets in the path.
• The upstream port’s supported speed.
• Whether a known-good cable produces a different result.

Internet speed tests alone do not measure the full capability of a local network link.

10. Label and Document

Label the upstream cable and endpoint connections. Keep a basic port map and retain the correct adapter with the switch.

For installations requiring backup operation, size a UPS for the switch, router and any other equipment that must remain online.

Troubleshooting Common Problems

ProblemChecks to makeNo power indicatorCheck the outlet, adapter and DC connectorNo link on one portCheck endpoint power and try a known-good cableLocal access works but internet does notCheck the router, gateway, DNS and internet serviceConnection negotiates at 100MbpsCheck endpoint capability and the complete cable pathCamera does not startProvide its required separate power sourceInstability after adding a cableCheck for an accidental loopPrinter cannot be reachedConfirm its address and computer configurationSeveral devices are slow togetherCheck shared upstream and resource capacity

Advantages

• Simple installation without switch configuration.
• Adds wired connections to an existing network.
• Supports Gigabit-capable equipment.
• Works with mixed-speed Ethernet endpoints.
• Requires no controller account for basic use.
• Compact desktop format.
• Includes automatic energy-saving functions.

Disadvantages and Limitations

• Does not provide PoE.
• One port normally serves the upstream connection.
• No configurable VLAN or management dashboard.
• No fiber interface.
• Does not provide Wi-Fi or internet routing.
• A shared upstream link can become a bottleneck.
• Hardware revisions differ in physical and electrical details.

Alternatives for Different Requirements

For managed networking with integrated device power, review the UniFi Pro 8 PoE at Ubiquiti UniFi Kenya. Compare its interfaces, power capacity and management requirements against your project.

You can also assess the TP-Link 8-Port Gigabit Switch at Orbitlink Solutions. Confirm the exact listed model before comparing detailed specifications.

The D-Link DGS-108 Gigabit Unmanaged Desktop Switch at Tawa is another option for straightforward wired expansion. It is a separate model, so check its enclosure, accessories and hardware version independently.

Package and Accessories

Confirm the quoted package includes the DGS-1008D, correct power adapter and applicable documentation.

Ethernet cables, UPS equipment, mounting accessories and installation services should be specified separately unless expressly included. Verify the supplied product’s condition and warranty coverage before ordering.

Frequently Asked Questions

Does the DGS-1008D supply PoE power?

No. Cameras, access points and phones need a separate compatible power source.

How many devices can connect alongside a router?

With one port used upstream, seven remain for directly connected equipment.

Does it have a login page?

No administrator login is required for basic unmanaged operation.

Is the DGS-1008D the same as the DES-1008D?

No. The DGS-1008D supports Gigabit Ethernet, while the DES-1008D is a Fast Ethernet model. Check the complete model before ordering.

Can it work without internet?

Correctly configured local devices can communicate without internet. Internet-based applications still require an upstream connection.

Will it make my internet faster?

It may remove a slower local connection if that is the bottleneck. It cannot increase the speed provided by the internet service.

Buy the D-Link DGS-1008D in Kenya

Contact Network Switch Kenya for a quotation on the D-Link DGS-1008D 8-Port Gigabit Switch. Share your device count and cable requirements, and confirm the supplied hardware revision and accessories before purchase.